A big letter with a name lying across it, for a door, a shelf or a gift. The base stays flat so it stands on its own. Choose how you print at the top and the generator builds the model for it: one multi-colour print, filament changes at heights it lists for you, or separate one-colour parts that press together.
The editor
The Initial Name Sign editor: settings on the left, the model updates as you change them.
All settings
- How you print - AMS / multicolour, One nozzle, filament changes, Separate parts, one colour each
- Letter colour depth - 0.6-30 mm
- Letter - your text, up to 2 characters
- Name - your text, up to 20 characters
- Letter font - 16 fonts
- Name font - 31 fonts
- Letter height - 50-250 mm
- Thickness - 4-30 mm
- Name width - 50-160 %
- Name position - 10-90 %
- Letter outline - 0-8 mm
- Outline height - 0.4-6 mm
- Text relief - 0.4-6 mm
- Insert depth - 1-20 mm
- Fit clearance - 0-0.6 mm
- Letter color - any colour
- Outline color - any colour
- Name color - any colour
Printing
Print it lying flat, no supports. With filament changes the editor shows the exact heights. The press-fit parts depend on your printer: start with the default 0.2 mm and adjust if they are too tight or too loose.