About this generator
Raises the laptop and tilts it towards you. The top plate is vented with a honeycomb, circle or diamond pattern, the ribs end in a lip that stops the laptop sliding, and two bars underneath keep it from folding sideways.
What you can change
- Material - 3 to 6.35 mm
- Size - 150 to 450 mm wide, 150 to 350 mm deep, 2 to 6 ribs
- Tilt - 0 to 25 degrees and the height at the front
- Front lip - how far it stands above the plate
- Cable notch - a cut-out at the back, 0 for none
- Pattern - honeycomb, circles, diamonds or none
Cutting and assembly
You get a ZIP with a DXF and an SVG. Engraving is black, inner cuts are blue, outlines red and part names green, so LightBurn imports them as separate layers in the right order. Sizes are net - set the kerf in your laser software, not here. Lay the bars notches up, press the ribs into them with the lips at the front, then put the top plate on the ribs.
Frequently asked questions
Which file formats can I download?
Laptop Stand - tilted, vented and slot-together exports as DXF, SVG. STL works in any slicer (Bambu Studio, OrcaSlicer, PrusaSlicer, Cura). 3MF preserves multi-color metadata for AMS / MMU-equipped printers.
Is this generator free to use?
Costs 10 credits per download. New accounts get 30 free credits, enough to try it before buying anything.
Can I customize the dimensions and details?
Yes — all parameters (size, walls, hole grid, chamfer, color) are live-adjustable in the browser. The 3D preview updates instantly as you tweak sliders.
Do I need an account?
An account lets you save drafts, sync settings across devices, and use the free daily quota. Browse and preview without one — login only required for download.
Related generators
Laser-Cut Box - finger joints, hinged lid and handle
A plywood box for the laser: finger joints, a lid on a hinge, a closing tongue and a handle. Set the size and the sheet thickness, download DXF + SVG.
Sliding Lid Box - a plywood box with a lid that slides in
A plywood box with finger joints and a lid that slides in over the front wall, with a finger slot you can move. Set the size and play, download DXF + SVG.
Tray with Dividers - a plywood grid that holds without glue
An open plywood tray split into a grid of compartments. The dividers cross-halve and lock into the walls and the floor, no glue. Set the size, columns, rows and divider height.