About this generator
A case with drawers stacked one above the other, like a little chest of drawers for screws, stamps or SD cards. Every drawer is the same open box on finger joints, with a finger slot in the front.
What you can change
- Material - 3 to 6.35 mm
- Size - 60 to 600 mm wide and deep, 40 to 400 mm high
- Drawers - 1 to 5, each at least 25 mm high inside
- Play - 0.1 to 1 mm on the sides and at the back
- Finger slot - width and depth
- Preview - pull the drawers out to check the fit
Cutting and assembly
You get a ZIP with a DXF and an SVG. Engraving is black, inner cuts are blue, outlines red and part names green, so LightBurn imports them as separate layers in the right order. Sizes are net - set the kerf in your laser software, not here. Build the case first, shelves before the top, then the drawers. If they run tight, raise the play or the kerf compensation.
Frequently asked questions
Which file formats can I download?
Drawer Box - one to five drawers in a plywood case exports as DXF, SVG. STL works in any slicer (Bambu Studio, OrcaSlicer, PrusaSlicer, Cura). 3MF preserves multi-color metadata for AMS / MMU-equipped printers.
Is this generator free to use?
Costs 10 credits per download. New accounts get 30 free credits, enough to try it before buying anything.
Can I customize the dimensions and details?
Yes — all parameters (size, walls, hole grid, chamfer, color) are live-adjustable in the browser. The 3D preview updates instantly as you tweak sliders.
Do I need an account?
An account lets you save drafts, sync settings across devices, and use the free daily quota. Browse and preview without one — login only required for download.
Related generators
Laser-Cut Box - finger joints, hinged lid and handle
A plywood box for the laser: finger joints, a lid on a hinge, a closing tongue and a handle. Set the size and the sheet thickness, download DXF + SVG.
Sliding Lid Box - a plywood box with a lid that slides in
A plywood box with finger joints and a lid that slides in over the front wall, with a finger slot you can move. Set the size and play, download DXF + SVG.
Tray with Dividers - a plywood grid that holds without glue
An open plywood tray split into a grid of compartments. The dividers cross-halve and lock into the walls and the floor, no glue. Set the size, columns, rows and divider height.