About this generator
A shelf for figures, minerals, paints or anything you want to see from the front. Every shelf leans towards you and has a lip so nothing slides off. If a shelf would leave too little room above it, the generator uses fewer shelves.
What you can change
- Material - 3 to 6.35 mm
- Size - 100 to 600 mm wide and high, 50 to 300 mm deep
- Shelves - 2 to 6, tilted 0 to 30 degrees
- Front lip - 3 to 20 mm above the shelf
- Top - with a top panel or open
- Pattern - none, honeycomb, circles or diamonds on the sides
Cutting and assembly
You get a ZIP with a DXF and an SVG. Engraving is black, inner cuts are blue, outlines red and part names green, so LightBurn imports them as separate layers in the right order. Sizes are net - set the kerf in your laser software, not here. Fit the back to one side, slide in the lips and shelves, add the top, then press the second side onto all the tabs at once. Glue once everything fits.
Frequently asked questions
Which file formats can I download?
Display Shelf - tilted shelves with a front lip exports as DXF, SVG. STL works in any slicer (Bambu Studio, OrcaSlicer, PrusaSlicer, Cura). 3MF preserves multi-color metadata for AMS / MMU-equipped printers.
Is this generator free to use?
Costs 15 credits per download. New accounts get 30 free credits, enough to try it before buying anything.
Can I customize the dimensions and details?
Yes — all parameters (size, walls, hole grid, chamfer, color) are live-adjustable in the browser. The 3D preview updates instantly as you tweak sliders.
Do I need an account?
An account lets you save drafts, sync settings across devices, and use the free daily quota. Browse and preview without one — login only required for download.
Related generators
Laser-Cut Box - finger joints, hinged lid and handle
A plywood box for the laser: finger joints, a lid on a hinge, a closing tongue and a handle. Set the size and the sheet thickness, download DXF + SVG.
Sliding Lid Box - a plywood box with a lid that slides in
A plywood box with finger joints and a lid that slides in over the front wall, with a finger slot you can move. Set the size and play, download DXF + SVG.
Tray with Dividers - a plywood grid that holds without glue
An open plywood tray split into a grid of compartments. The dividers cross-halve and lock into the walls and the floor, no glue. Set the size, columns, rows and divider height.